Kewtech KT300 Digital Insulation Tester

Kewtech Approved distributor.

Includes: ACC020 two wire test lead set, Carry Case, KT300 Manual, Batteries, Calibration certificate.

£428.00
Tax excluded
Quantity
  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.

  Compliant

Payment Card Industry Data Security Standard (PCI DSS) Compliant.

  Protected

TLS (SSL) - all data/information is secure from interception.

The Kewtech KT300 Digital Insulation/Continuity Tester is a handheld, single-function tester for determining insulation and continuity. Includes all of the functionality you need for measurements of insulation resistance in any electrical application in accordance with 18th Edition regulations. The KT300 is compact, accurate and easy to use with a ‘hands free’ facility.

FEATURES

Insulation test at 50V, 100V 250V, 500V & 1000V.
Continuity test with audible tone.
Test lead null facility.
Buzzer mode.
Hands free function.
Breakdown voltage.
Voltage present LED.
Auto power off.

KT300 On Site Testing Video
Kewtech KT300 Specifications
Continuity Test Range Accuracy
Range Tolerance (@20ºc).
0.00 to 9.99 Ω + (3% + 2 digits).
10.0 to 99.9 Ω + (3% + 2 digits).
100 to 19.99 kΩ + (3% + 2 digits).
Open circuit Voltage >4V, <10V.
Zero offset adjust (test lead null) 5 Ω.
Typical test time (2 Ω) >2 seconds.
Hazard Warning LED >25V.
Run Leakage
Test Voltage Ranges (Auto Range) Tolerance (@ 20°C)
50 V 0.01 to 9.99 MΩ ± (6% + 2 digits)
10.0 to 49.9 MΩ ± (6% + 2 digits)
100 V 0.01 to 999 MΩ ± (6% + 2 digits)
10.0 to 99.9 MΩ ± (6% + 2 digits)
250 V 0.01 to 9.99 MΩ ± (3% + 1 digits)
10.0 to 99.9 MΩ ± (3% + 1 digits)
100 to 199 MΩ ± (6% + 1 digits)
500 V 0.01 to 9.99 MΩ ± (3% + 1 digits)
10.0 to 99.9 MΩ ± (3% + 1 digits)
100 to 199 MΩ ± (3% + 1 digits)
200 to 499 MΩ ± (6% + 1 digits)
1000 V 0.01 to 9.99 MΩ ± (3% + 1 digits)
10.0 to 99.9 MΩ ± (3% + 1 digits)
100 to 399 MΩ ± (3% + 1 digits)
400 to 999 MΩ ± (6% + 1 digits)
Insulation Output Voltage
Voltage Load Output Current Tolerance
50 V 50 kΩ 1 mA -0% +20%
100 V 100 kΩ 1 mA -0% +20%
250 V 250 kΩ 1 mA -10% +20%
500 V 500 kΩ 1 mA -10% +20%
1000 V 1 MΩ 1 mA -10% +20%
Short circuit current (into 2k Ω) < 2 mA
Typical Test Time (10 MΩ) < 2 seconds
General Specifications
Power supply 4 x AA LR6 Batteries.
Battery life 50 hours.
Overvoltage category CAT III 500V
CAT IV 300V.
Operating temperature 0 - 40ºC.
Storage temperature -10 to 60ºC.
Operating humidity 80% @ 31ºC to 50% @ 40ºC.
Safety compliance BSEN 61010-2-030:2010.
EMC compliance BSEN 61326-2-2:2013.
Performance standard BSEN 61557-1:2007
BSEN 61557-2:2007
BSEN 61557-4:2007
Probes GS38 compliant.
Dimension 180 x 85 x 50mm.
Weight Approximately 450g.
KT300 warranty Two-years.
KT300

Download

Kewtech KT300 Datasheet

PDF Specifications of the Kewtech KT300 Digital Insulation and Continuity Tester.

Download (149.55k)
COMPONENT
DESCRIPTIONPART No.
Non-fused Test leads2 Wire right angle connector Test Leads. Includes 1 pair 4mm leads, 1 pair base prods and 1 pair crocodile clips.ACC020
Fused Upgrade kitConverts non fused test leads to fused for extra safety. Includes 1 pair fused black & red prods, 1 pair fused
black & red crocodile clips. Fits ACC020.
ACC040

16 other products in the same category:

arrow_upward