TPI 717R Flue Gas Combustion Analyser

Includes: TPI 717 Flue Gas Analyser, Rubber Boot, Soft Carrying Case, Flue Sampling Probe, In-Line Filter Assembly on Flue Probe, Temperature Probe, Mini Pump Protection Filter Assembly + Spare Filters, Removable Exhaust Spigot, Instruction Manual.

HTTPS Secure

Our pages are encrypted and protected from cyber-attack.

Compliant

Payment Card Industry Data Security Standard (PCI DSS) Compliant.

Protected

TLS (SSL) - all data/information is secure from interception.

The TPI 717R flue gas combustion analyser features pre-calibrated, replaceable oxygen and carbon monoxide smart sensors to make sensor replacement in the field simple. Its built-in magnet enables hands-free use.

The 717R features a 10,000 ppm CO sensor with quick recovery time, an in-line water trap that protects the sensor from water damage and a pump filter that helps prevent the pump from becoming clogged with dirt/dust debris. The 3-line LCD makes readings easy to see, and the smart sensors are simple to replace in the field, so you can get back to finishing the job.

Fast purge and the ability to perform fuel selection during start-up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analysers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyser is turned on. The instrument is ruggedly constructed and comes with a limited 6 Year Warranty*.

*Subject to annual servicing being carried out by TPI or one of their approved service centres.

FEATURES

10,000 ppm CO sensor for longer life and quicker recovery times after combustion tests.
In-line water trap bowl filter to prevent water ingress.
In-line mini pump protection filter to prevent a blocked pump caused by dust/dirt ingress.
Multi-fuel.
Timed Let/By & Tightness test.
Timed CO Build-Up room test.
Integrated magnet.
Calibration due countdown on switch-on.
Soft carry case.
Diagnostic software.
Readings output to (Optional) IR printer.

TPI Model 717R Deluxe Flue Gas Analyser Product Video

TPI 717 Deluxe Flue Gas Combustion Efficiency Analyser Specifications

Instrument
Operating Temperature Range	-10˚C to +50˚C.
Battery / Battery Life	Rechargeable Ni-MH / > 6 Hours.
Charger Input Voltage	115V or 230V : 50/60 Hz AC.
Fuels	Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane Wood (Dry), Bagasse, Wood Pellet.
Pressure Ranges	mbar, kPa & inH2O.
Display	Backlit LCD.
Data Storage	50 sets of readings.
Time and Date	24 Hour Real Time Clock.
Dimensions	200 x 90 x 60mm.
Weight	500g.
Casing	Rubber Boot as Standard.
Switch Off	Failsafe.
Exhaust	Safety Spigot.
Conforms to	BS7927 (and the draft BS7967).

Flue Temperature Probe Specifications

Construction	Pistol Grip with Stainless Steel Shaft.
Hose Length	2500mm.
Insertion Length	200mm.
'K' Type Thermocouple Accuracy	+/- 0.3%, +/- 1˚C.
Maximum Temperature	800°C.

Gases

Gases	Range	Resolution	Accuracy
Oxygen	0-25%	0.1%	+/- 0.3%
Carbon Monoxide	0-10,000 ppm	1 ppm	<20 ppm : +/- 3 ppm >100 ppm : +/- 5 %
Carbon Dioxide (calculated)	0-25%	0.1%	+/- 0.3%
Combustion Efficiency	0-100%	0.1%

Pressure Measurement

Selectable Ranges	mbar, kPa and inH2O.
Range	- 150 mbar to + 150 mbar.
Resolution	0.01 mbar & 0.1 mbar.
Accuracy	+/- 0.5% fsd.

Temperature Measurement

Input Type	K-Type thermocouple
Range	-58°F to 1832°F (-50°C to 1000°C)*
Resolution	1°F (1°C)
Accuracy	+/- (0.3% of rdg + 2°F) or +/- (0.3% of rdg + 1°C).
* The thermocouple supplied (GK11M) has the ability to measure temperatures in the -50°F to 950°F range. The 712 accepts industry standard K-type thermocouple probes with sub-mini connectors.