Fluke 9100S Handheld Dry-Well
Includes: Power Cord, Fluke 9100S Dry-Well User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide.
Our pages are encrypted and protected from cyber-attack.
Payment Card Industry Data Security Standard (PCI DSS) Compliant.
TLS (SSL) - all data/information is secure from interception.
The Fluke 9100S Mid-Range Field Calibrator may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees.
Plug it in, switch it on set the temperature with the front-panel buttons, and insert your probe into the properly sized well. Compare the reading of your device to the display temperature or to an external reference, and the difference is the error in your device. With a proprietary Fluke Calibration temperature controller, the 9100S has a display resolution of 0.1 degrees, an accuracy of ±0.5°C, a stability of ±0.1°C, and a stabilization time of just five minutes.
The temperature is accurately controlled by Fluke’s digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater.
The LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument’s range. Multiple fault protection devices insure user and instrument safety and protection.
Rapid heating and cooling.
RS-232 interface capability.
Temperature scan rate control.
Eight set-point memory.
Adjustable readout in °C or °F.
|Range||35 °C to 375 °C (95 °F to 707 °F.|
|Accuracy||± 0.25 °C at 50 °C; ± 0.25 °C at 100 °C; ± 0.5 °C at 375 °C.|
|Stability||± 0.07 °C at 50 °C; ± 0.1 °C at 100 °C; ± 0.3 °C at 375 °C.|
|Well-to-Well Uniformity||± 0.2 °C with sensors of similar size at equal depths within wells.|
|Heating times||35 °C to 375 °C: 9.5 minutes.|
|Cooling times||375 °C to 100 °C: 14 minutes.|
|Well depth||102 mm (4 in);1.6 mm (1/16 in) hole is 89 mm (3.5 in) deep.|
|Power||115 V ac (± 10 %), 55–65 Hz, 1.5 A or 230 V ac (± 10 %), 0.8 A, 45–55 Hz, 175 W.|
|Computer interface||RS-232 interface.|
|Dimensions||57 x 125 x 150 mm (2.25 x 4.9 x 6.1 in).|
|Weight||1 kg (2 lb 3 oz).|
|Fluke 9100S warranty||1 year.|