Megger MIT430/2 Insulation and Continuity Tester

The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.

All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display.

The MIT430/2 has a tough shock-absorbing rubber over moulding that provides excellent grip, and it also features weatherproof IP54 protection. In addition, the instrument has a bar at the top to allow the addition of future accessories, such as magnetic hanging straps and belt loops.

ELECTROSTATIC DISCHARGE TESTING

The ability to swap displays from kΩ, MΩ, GΩ to 10^5, 10^6, 10^7 and to vary the test voltage make the MIT430/2 ideal for ESD testing, including servicing of equipment and routine maintenance of ESD conductive flooring, bench mats and grounding systems etc. Typical industries include: electronic manufacturing, electronic servicing and repair calibration houses.

FEATURES

Stabilised insulation testing.
Variable 50V to 1000V test voltage.
Auto hold on continuity tests.
Analogue arc with pointer.
200Gohm test range.
Continuous continuity range.
Rechargeable options.
Contoured ergonomic design.
Increased battery life.
IP54 ingress protection.
CAT IV safety design.
600V measurement.

Megger MIT430/2 Specifications:

• Insulation test voltage: 50 V, 100 V, 250 V, 500 V and 1000 V.
• Lock button on MΩ: Yes.
• Continuity measurement: 0.01 Ω to 999 kΩ (0 to 1000 kΩ on analogue scale).
• Continuity accuracy: ± 3% ± 2 digits (0.01 Ω - 10 MΩ ).
• Auto reverse polarity (setup ON-OFF).
• Lead resistance: Null up to 9.00 Ω.
• Voltage range AC: 10 mV to 600 V TRMS sinusoidal (40 Hz to 400 Hz), DC: 0 to 600 V.
• Frequency measurement range: 45 Hz - 450 Hz.
• Display range Analogue: 1 GΩ full scale.
• Resolution: 0.1 kΩ.
• Polarisation Index, Dielectric Absorption Ratio.
• PASS/FAIL on limit alarms.
• Bluetooth download + software.
• Storage capacity: >1000 test results.
• Power: 6 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) rechargeable cells may be used.
• Protection: IP 54.
• Dimensions: 228 mm x 108 mm x 63 mm (9.00 in x 4.25 in x 2.32 in).
• Weight: 600 g (28.74 oz).
• Megger MIT430/2 Warranty: 1 year (3 year subject to registering).

Includes: Megger MIT430/2, Red/Black Silicone test leads with Probes + Clips, Owners information CD, Batteries 6 x AA Alkaline, Hard carry case.