loading spinner
Martindale NC2 Non-contact Voltage Tester
  • Martindale NC2 Non-contact Voltage Tester
  • Martindale NC2 Non-contact Voltage Tester

Martindale NC2 Non-contact Voltage Tester

Martindale approved distributor and service centre.

Includes: 2 x 1.5V AAA alkaline batteries and instruction manual.

  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.


Payment Card Industry Data Security Standard (PCI DSS) Compliant.


TLS (SSL) - all data/information is secure from interception.

The Martindale NC2 is a non-contact voltage tester for accurately detecting the presence of AC voltages between 200V and 1000V. When voltages are detected, a bright red LED illuminates the clear tip of the NC2 and a buzzer sounds.

It will indicate approximately 4mm from a conductor at 240V AC, making it ideal for tracing live circuits within cable containment and for voltage detection in sockets and junction boxes. The NC2 can be used to differentiate between Live and Neutral wires and detect blown fuses.

The pen-shaped design with clip makes it ideal for carrying in a pocket or tool belt when working at height or in difficult to access locations. A built-in torch in the tip is ideal for use in low light areas illuminating the area under test. Other NC2 features include low battery indication and LED pulse when on.

The NC2 replaces the Martindale VT2.


Optimised for 230V single and 3 phase supplies.
Audible and visual indication from 200V to 1000V AC.
Extended probe for easy access.
Clear tip for high visibility indication.
LED torch for use in low light.
Power on LED pulse and low battery indicator.

Martindale NC Comparison Chart
AC Voltage Range 200-1000V 200-1000V 12-1000V
Frequency Range 40-400Hz 40-400Hz 40-400Hz
Magnetic Field Detection >10mT > 10mT
LED Indication Yellow LED Red LED Yellow / Red LED Red LED
Audible Indication
Power On Pulse LED
Low Battery Indication
Auto Power Off
LED Torch

Martindale NC2 Specifications
Maximum voltage 1000V AC rms.
Voltage sensitivity range 200 to 1000V AC rms.
Frequency range 40 to 400Hz.
Temperature (Operating and Storage) 0°C to 40°C.
Humidity (Operating and Storage) ≤80% RH.
Altitude Up to 2000m.
Conforms to BS EN 61010-1:2010 CAT IV 1000V Class II, Double insulation.
IP Rating IP40 to BS EN 60529.
EMC Conforms to BS EN61326-1.
General Specifications
Power 2 x 1.5V AAA alkaline batteries (IEC LR03, NEDA 24A).
Current Consumption 34 mA max.
Dimensions 158(L) x 20(W) x 27(D).
Weight 55g.
Martindale NC2 warranty Two-years.


Martindale NC Series Datasheet

PDF Specifications of the Martindal NC Series Non-contact Solenoid/Voltage/Magnetic Field Testers.

Download (839.17k)

13 other products in the same category: