Chauvin MINI 01 Current Clamp

Small, compact and particularly resistant, this range of miniature clamps is designed for measurements from a few milli-amperes to 150 A AC.

HTTPS Secure

Our pages are encrypted and protected from cyber-attack.

Compliant

Payment Card Industry Data Security Standard (PCI DSS) Compliant.

Protected

TLS (SSL) - all data/information is secure from interception.

Small and compact, the Chauvin MINI 01 current clamp is the ideal complement for any multimeter to measure AC currents in low-power tertiary or industrial applications. Simply place the multimeter on the range mA~ . The current measured in A is equal to the value displayed in mA.

If there is a current in the conductor clamped, the MINI 01 clamp is protected against overvoltages during disconnection from the measurement instrument.

The MINI 01 has a double-insulated cable 1.5m long, terminated by 2 insulated elbowed male banana connectors Ø 4 mm. The MINI clamps give True RMS results when used with a True RMS instrument.

FEATURES

Rated current: 150 A AC.
Output signal: alternating current.
Transformation ratio: 1,000/1.
Output via lead and isolated Ø 4 mm male plugs.
Output protected against voltage surges.

Chauvin MINI 01 Specifications:

Measurement range: 2 A ...150 A.
Accuracy of primary current in %: ≤ 2.5 % + 0.15 A (load 1 Ω), ≤ 3 % + 0.15 A (load 10 Ω).
Phase shift: not specified.
Output signal: 1 mA AC / A AC (1000 / 1) (150 mA for 150 A).
Load impedance: ≤ 10 Ω.
Maximum currents: I < 150 A permanent from 48 Hz ...500 Hz.
Clamping capacity: Cable Ø max 10 mm.
Operating temperature: -10°C to +50.
Casing protection rating: IP40 (EN 60529 Ed. 1992).
Dimensions: 130 x 37 x 25 mm
Weight: approx. 180 g
Chauvin Arnoux MINI 01 warranty: 12 months.