Chauvin C.A 6550 10KV Insulation Tester

Specially adapted for checking insulation on rotating machinery with a 12 kV power supply or higher, the Chauvin C.A6550 complies with the IEEE43 standard which recommends insulation testing at 5-10kV.

• Fixed Test Voltage: 500V, 1,000V, 2,500V, 5,000V & 10,000V.
• Variable Test Voltage: 40V - 10,000V - 3 presettable voltage values.
• Ramp mode: 3 presettable ramps: start voltage / end voltage / duration.
• Discharge after test: Automatic.
• Timer: Up to 99 minutes 59 seconds.
• Automatic calculation: DAR / PI / DD /ppm/V ratios.
• Measurement display: 3 filters with 3 possible time-constant.
• Programmable alarms: An alarm threshold can be memorised.
• Storage: 256 recordings, 80,000 points: R, U, I and date.
• Communication: Optically-isolated port for USB and RS232 links.
• PC software: DataView.
• Power supply: NiMH rechargeable batteries.
• Battery charging: Battery charging possible while performing insulation measurements.
• Electrical safety: 1,000V CAT IV - IEC 61010-1 and IEC 61557.
• Dimensions: 340 x 300 x 200 mm.
• Weight: 6.2 kg approx. (excluding accessories).
• Chauvin Arnoux C.A 6550 Warranty: 1 year.

Includes: Bag with 2 safety leads 3 m long equipped with an HV plug at each end (red / blue), 1 guard test lead 3 m long equipped with an HV plug at one end and an HV plug with rear connection at the other end (black), 3 crocodiles clips (red, blue, black), 2 CAT IV 1,000 V test probes (red/black) for voltage measurements, 1 blue lead with rear connection, 1 mains power cable 2 m long, DataView software, 1 optical / USB communication lead, 1 Chauvin C.A6550 operating manual in 5 languages on CD-ROM and 5 specification labels (1 per language).