Megger DLRO10HD 10A Low Resistance Ohmmeter
Includes: DLRO10HD Dual Power 10A Low Resistance Ohmmeter, DH4-C Connect Duplex Handspikes, Lid-Mounted Test Lead Pouch, DLRO10HD User Guide on CD, Warranty Book.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
Equally at home in the laboratory, the workshop or in the field, on the bench or on the ground, Megger’s heavy duty DLRO10HD low resistance ohmmeter combines rugged construction with accuracy and ease of use. It features an internal rechargeable battery and can also operate from a mains supply, even if the battery is completely flat.
The Megger DLRO10HD is well suited to measuring thick conductors, bonds and quality of welding because of its 10 A range for resistance values up to 250 mΩ. The instrument provides five test modes each of which is selected through a simple rotary control.
The five operating modes include two automatic modes that sense connection of the probes to minimise test time and increase productivity. To overcome thermal EMFs current is passed through the unit under test in both directions and the resulting resistance averaged.
NEW interchangeable test lead terminations.
High or low output power selection for condition diagnosis.
Rechargeable battery or line power supply, continuous operation, even with dead battery.
10 A for 60 seconds, less time waiting to cool, great for charging inductance.
High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse.
Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only).
Rotary switch selects one of five test modes, including auto start on connection.
Although the DLRO10HD is not designed as transformer ohmmeter, it is fitted with a test in progress lamp associated with the TEST button, which indicates that current is flowing in the C1-C2 loop. This lamp and a warning triangle on the LCD will flash at end of a test on an inductive load whilst a discharge current is still flowing and will stop flashing when the current has decayed to less than 1 mA.
|Test Current||Resistance Range||Resolution||Basic Accuracy*||Full Scale Voltage||Max. Power Output|
|0.1 mA||0 to 2500.0 Ω||0.1 Ω||± 0.2%||25 mV||25 μW|
|0.1 mA||0 to 250.00 Ω||0.01 Ω||± 0.2%||25 mV||2.5 μW|
|1 mA||0 to 25.000 Ω||1 mΩ||± 0.2%||25 mV||25 μW|
|10 mA||0 to 2500.0 mΩ||0.1 mΩ||± 0.2%||25 mV||250 μW|
|100 mA||0 to 250.00 mΩ||0.01 µΩ||± 0.2%||25 mV||2.5 mW|
|1 A||0 to 25.000 mΩ||1 µΩ||± 0.2%||25 mV||25 mW|
|10 A||0 to 2500.0 µΩ||10 µΩ||± 0.2%||25 mV||0.25 W|
|1 A||0 to 2500.0 mΩ||0.1 mΩ||± 0.2%||2.5 V||2.5 W|
|10 A||0 to 250.00 mΩ||0.01 µΩ||± 0.2%||2.5 V||25 W|
|* The accuracy stated assumes forward and reverse measurements.|
||< 0.01% per ºC, from 5 ºC to 40 ºC|
|Display size/type:||Main 5 digit + 2 x 5 digit secondary displays.|
|Battery type:||6 V, 7Ah sealed lead acid.|
|Voltage input range:||100 - 240 V 50 / 60 Hz 90 VA.|
|Charge time:||8 hours.|
|Battery life:||>1000 Auto (3 sec) tests.|
|Auto power down:||300s.|
|Operating temperature and humidity:||-10 °C to +50 °C.|
|EMC:||In accordance with IEC61326-1 (Heavy industrial).|
|Maximum lead resistance:||100 mΩ total for 10 A operation irrespective of battery condition.|
|Mode selection:||Rotary switch.|
|Range selection:||Rotary switch.|
|Pouch for test leads:||Yes (lid mounted).|
|IP rating:||IP65 case closed, IP54 battery operation.|
|Dimensions:||(L)315 mm x (W)285 mm x (H)181 mm.|
|Megger DLRO10 HD warranty:||Two years.|
No customer reviews for the moment.
|TL1.5-CL||Connect test leads with indicator light - 1.5 m.||1006-456|
|TL3-CL||Connect test leads with indicator light - 3 m.||1006-458|
|TL6-CL||Connect test leads with indicator light - 6 m.||1006-459|
|TL1.5-C||Connect test lead without indicator light - 1.5 m.||1006-452|
|TL3-C||Connect test lead without indicator light - 3 m.||1006-454|
|TL6-C||Connect test lead without indicator light - 6 m.||1006-455|
|EL6-C||Connect Extension Lead - 6 m.||1006-460|
|DP1-C||Duplex connect probe.||1006-450|
|DTP1-C||Duplex connect twist probe.||1006-449|
|CP1-C||Concentric duplex connect probe.||1006-448|
|KC1-C||Heavy duty kelvin clip.||1006-447|
|KC2-C||Insulated connect Kelvin clip.||1006-451|
|DH1-C||Two wire, four terminal duplex twist probe lead set - 3m.||1006-442|
|DH2-C||Single duplex twist probe lead - 6m.||1006-443|
|DH4-C||Two wire, four terminal duplex probe lead set - 1.5 m. One lead fitted with indicator lights.||1006-444|
|DH5-C||Two wire, four terminal duplex probe lead set - 3 m. One lead fitted with indicator lights.||1006-445|
|KL1-C||Two wire, four terminal kelvin clip lead set - 3 m.||1006-462|
|KL2-C||Two wire, four terminal insulated kelvin clip lead set - 3 m.||1006-461|