Megger DLRO10 Low Resistance Ohmmeter
Product shown at manufacturers RRP. Click on 'Best Price Quote' button or telephone (Belfast) 02890 830302 for our sale price.
Includes: 7 Ah NiMH battery module, DH4-C Duplex handspikes (2), one with indicator lights, 1.2m/4 ft (Not NLS models), Battery charger for operation from 115/230V, 50/60Hz supply, Cigar lighter adapter for battery charging, User guide, Warranty card.
- done HTTPS SECURE: Our pages are encrypted and protected from cyber-attack.
- done COMPLIANT: Payment Card Industry Data Security Standard (PCI DSS) Compliant.
- done PROTECTED: by TLS (SSL) - all data/information is secure from interception.
The Megger DLRO10 bring new standards to low resistance measurement. A fully automatic instrument, selecting the most suitable test current, up to 10A dc to measure resistance from 0.1µΩ to 2000Ω on one of seven ranges.
The DLRO10 is built into a strong, lightweight case that is equally at home in the field or in the laboratory. Light enough to be worn around the neck, they are small enough to be taken into areas which were previously too small to access. The Megger DLRO 10 uses a large, bright 4-1/2-digit LED display. A full range of test leads is available with probes, clamps and Kelvin clips.
The Megger DLRO10 is powered by a rechargeable Nickel Metal Hydride (NiMH) battery, which permits one thousand 10 Amp tests to be completed on a single charge. The battery module contains intelligent circuitry, which prevents damage to the battery from overcharging, and a battery state indicator. A removable lid that is hinged at the back and held closed by magnetic catches covers the top panel. This lid may be removed if required by opening fully and snapping out of its hinges.
Accurate results in under three seconds.
Auto current reversal cancels standing emfs.
Fuse protected to 600 V.
NiMH battery reduces weight.
250 mW power limit (with optional override) to avoid heating the test sample.
Automatically detects continuity in potential and current connections.
Visible warning of high voltages present at the terminals.
Visible warning of current flowing in the test sample.
Multiple operating modes including fully automatic.
|Resistance Ranges||Full Scale Volts||Test Current|
|1.9999 mΩ||0.1 μΩ||±0.2% ±0.2μΩ||20 mV||n/a||10 A||n/a|
|19.999 mΩ||1 μΩ||±0.2% ±2 μΩ||20 mV||20 mV||1 A||1 A|
|199.99 mΩ||10 μΩ||±0.2% ±20 μΩ||20 mV||200 mV||100 mA||1 A|
|1.9999 Ω||100μΩ||±0.2% ±0.2 mΩ||20 mV||200 mV||10 mA||100 mA|
|19.999 Ω||1 mΩ||±0.2% ±2 mΩ||20 mV||200 mV||1 mA||10 mA|
|199.99 Ω||10 mΩ||±0.2% ±20 mΩ||20 mV||200 mV||100 μA||1 mA|
|1999.9 Ω||100 mΩ||±0.2% ±0.2 Ω||200 mV||200 mV||100 μA||100 μA|
|Mode||Manual, Auto, Continuous, Inductive.|
|Speed||<3s for forward & reverse current and to display average.|
|Display||Measurement: 4 1/2 digit seven segment LED.|
|Range & Safety||LED indication.|
|Test method||Single cycle reversing d.c. ratiometric measurement -average result display.|
|Test current accuracy||±10%.|
|Test current stability||<10 ppm per second.|
|Lead resistance||Maximum 100 mΩ total for 10 A operation irrespective of battery condition.|
|Voltmeter Input Impedance||> 200 kΩ.|
|Noise rejection||Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads. Warning will show if hum or noise exceeds this level.|
|Battery Capacity||7 Ah NiMH rechargeable.|
|Battery Life||Typical 1000 x 10A Tests Before Recharge.|
|Recharge||Via external 90 V - 260 V 50/60 Hz charger or from 12 to 15 V dc supply.|
|Standard Charging Rate||2.5 hours to 90% capacity, 4 hrs for full charge.|
|Temperature||+5 ºC to +45 ºC (41 ºF to 113 ºF) at full specification
-10 ºC to +50 ºC (14 ºF to 122 ºF) at reduced accuracy.
|Storage Co-Efficient||-30 ºC to +70 ºC (-22 ºF to 158 ºF).|
|Slow Charging||<0.01% per ºC over range 5 ºC to 40 ºC (<0.006% per ºF from 4 1ºF to 104 ºF).|
|Humidity (MAX)||+10 ºC to +45 ºC (50 ºF to 113 ºF).|
|Altitude (MAX)||90% RH @ 40 ºC (104 ºF) non-condensing.|
|Safety||2000 m (6562 ft) to full safety specifications.|
|EMC||IP65 case closed,
IP54 battery operation.
|Dimensions||220 x 100 x 237 mm (8.6 x 4 x 9.5 in).|
|Weight||2.6 kg (5 3/4 lb.) including battery module.|
|Megger DLRO10 warranty||2 year, conditional upon registering.|
No customer reviews for the moment.
|Case||Carrying case for DLRO10/10X and all standard accessories.||6380-138|
|Cable bag||Carrying bag for cables.||18313|
|10 Ω Shunt||Calibration Shunt, 10 Ω, current rating 1 mA.||249000|
|1 Ω Shunt||Calibration Shunt, 1 Ω, current rating 10 mA.||249001|
|100 mΩ Shunt||Calibration Shunt, 100 mΩ current rating 1A.||249002|
|10 mΩ Shunt||Calibration Shunt, 10 mΩ current rating 10 A.||249003|
|Mains Lead||DLRO10LPU-UK Mains power attachment - UK plug.||1003-093|