loading spinner
Fluke 789 ProcessMeter
  • Fluke 789 ProcessMeter
  • Fluke 789 ProcessMeter

Fluke 789 ProcessMeter

Fluke authorised distributor and calibration house.

Includes: TL71 test lead set, AC72 alligator clips, batteries, Fluke 789 user manual & quick user guide.

  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.


Payment Card Industry Data Security Standard (PCI DSS) Compliant.


TLS (SSL) - all data/information is secure from interception.

The Fluke 789 ProcessMeter is a handheld, battery-operated tool for measuring electrical parameters, supplying steady or ramping current to test process instruments, and providing a > 24 V loop power supply.

The Fluke 789 is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. And with its built-in, selectable 250 ohm HART resistor, it eliminates the need to carry a separate resistor with you.


DMM and loop calibrator in one tool.
24 V Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settings
1200 ohm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
Infrared-port to process data in FlukeView Forms (V2.1) software
Externally accessible battery for easy battery changes.
1000V overload protection on V, ohms, frequency.
150V overload protection on mA, backed up by 440 mA 1000V fuse.
25% Manual Step plus Auto Step and Auto Ramp on mA output.

Fluke 789 Specifications
Current measurement Range 0-1 A AC or DC.
Resolution 1 mA.
Accuracy 0.2% + 2 LSD (DC).
Range 0-30 mA.
Resolution 0.001 mA.
Accuracy 0.05% + 2 lSD.
Current sourcing Range 0-20 mA or 4-20 mA.
Resolution 0.05% of span.
Drive capability 24 V Compliance or 1200 Ω @ 20 mA.
Frequency to 19.999 kHz, 0.005% + 1 LSD.
Continuity Beeps for resistance < 100 Ω.
Voltage measurement Range 0-1000 V AC (true-rms) or DC.
Resolution 0.1 mV to 1.0 V.
Accuracy 0.1% Rdg + 1 LSD (VDC).
Resistance measurement to 40 MΩ, 0.2% + 1 LSD.
Diode test 2.0 V shoes diode voltage drop.
Display current and % of span Yes.
Auto Step, Auto Ramp Yes.
Environmental Specifications
Operating temperature -20°C to 55°C.
Storage temperature -40°C to 60°C.
Humidity (without condensation) 95% up to 30°C
75% up to 40°C
45% up to 50°C
35% up to 55°C.
Temperature coefficient 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C).
Safety Specifications
Electrical safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92.
Overvoltage category IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V.
Maximum voltage 1000 V RMS.
Mechanical and General Specifications
Dimensions (H x W x L) 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in).
Weight 610 g (1.6 lbs).
Batteries 4 AA alkaline batteries.
Fluke 789 warranty 3 years.
Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA).
Shock and vibration Random, 2 g, 5-500 Hz
1 meter drop test.


Fluke 787B & 789 Datasheet

PDF Specifications of the Fluke 787B & Fluke 789 Process Meters.

Download (1.79M)
TP220-1 TP220 SureGrip™ Industrial Test Probes. 3971276
C100 Hard Meter and Accessory Case. 827055
C25 Large Soft Case for DMMs. 681114
AC220 SureGrip™ Alligator Clips. One pair (red, black) of small, insulated, nickel plated jaws. 1610103
TL223-1 Electrical Test Lead Set. 3971184
TL71-1 Premium Test Lead Set. 3971207
TLK-225 SureGrip™ Master Accessory Set. 3971234
TPAK Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit inc:

9 inch hook and loop strap
Universal hanger clip
Hook hanger for non magnetic surfaces
Strong magnet.
i1010 AC/DC Current Clamp (1000A). 617735
i400 AC Current Clamp (400A). 2277225
FLK-IR3000FC Fluke Connect infrared Connector. 4460436
PV350 PV350 Pressure Vacuum Module. 919811
80TK 80TK Thermocouple Module (Type K). 736736

1 other product in the same category: