loading spinner
Megger TDR500/3 Basic Hand-held TDR
  • Megger TDR500/3 Basic Hand-held TDR
  • Megger TDR500/3 Basic Hand-held TDR

Megger TDR500/3 Basic Hand-held TDR

Megger approved distributor and service centre.

Includes: Hard carry case, Miniature clip test lead set and Megger TDR 500/3 User guide CD.

Quantity
  HTTPS Secure

Our pages are encrypted and protected from cyber-attack.

  Compliant

Payment Card Industry Data Security Standard (PCI DSS) Compliant.

  Protected

TLS (SSL) - all data/information is secure from interception.

The Megger TDR500/3 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m and a 5 km maximum range depending on velocity factor selected and cable type.

Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.

The Megger TDR500 menu allows the units of the distance and velocity factor to be changed. To enter the menu, switch the instrument on holding down the warble key. To change the displayed units, press one of the velocity factor keys. The options available are m and Ratio, m and m/us, ft and Ratio and ft and ft/us.

FEATURES

Simple operation.
AUTO selection of gain and pulse width.
Ultra fast pulse for near end fault identification.
Trace HOLD feature.
IP54 rating offers real life working.
Designed for use on all metallic cable pairs.

Megger TDR500/3 Specifcations
Ranges 10 m, 25 m, 100 m, 250 m, 1000 m, 2500 m, 5000 m
(30 ft, 75 ft, 300 ft, 750 ft, 3000 ft, 7500 ft, 15000 ft).
Accuracy ±1% of range ± pixel at 0.67 VF
[Note- The measurement accuracy is for the indicated cursor position only and is conditional on the velocity factor being correct.].
Resolution 1% of range.
Input Protection This instrument complies with IEC61010-1 for connection to live systems up to 150 V CAT IV when used with the optional fused test lead set.
Output Pulse 5V peak to peak into open circuit. Pulse widths determined by range and cable.
Gain Set for each range with three user-selectable steps (in manual operation mode).
Velocity Factor Variable from 0.2 to 0.99 in steps of 0.01.
TX Null Automatic.
Power Down Automatic after 5 mins with no keys pressed.
Backlight Stays on for 1 minute with no keys pressed.
Batteries 5 x LR6 (AA) batteries, manganese alakli or nickel metal-hydride cells.
Battery Life Up to 14 hours (typical).
Dimensions 230 mm x 115 mm x 48 mm.
Weight 0.6 kg.
Megger TDR500/3 warranty Two-years.
Megger
1002-227

Download

Megger TDR500/3 Datasheet

PDF Specifications of the Megger TDR500/3 Time Domain Reflectometer.

Download (112.89k)

1 other product in the same category:

arrow_upward