Fluke Ti450 9Hz Thermal Imager

Fluke authorised distributor and calibration house.

Product shown at manufacturers RRP. Click on 'Best Price Quote' button or telephone (Belfast) 02890 830302 for our sale price.

Simply point and shoot - the camera automatically processes a stack of images focused near and far to give you clear, accurate focus throughout the field of view.

More details

Fluke Electronic


New product

£ 6,395 tax excl.

The Fluke Ti450 Infrared Camera, a high-end model in its Professional Series, takes focusing to a higher plane with MultiSharp™ Focus. An out-of-focus thermal image can be off by 20 degrees or more with no way to correct it once it has been captured, short of retaking new images. The Fluke® Ti450 Infrared Camera, compatible with Fluke Connect®, solves this problem by delivering in-focus images of everything in the field of view.fluke ti450 9hz thermal camera IR image.

MultiSharp™ Focus is a new technology that rapidly takes multiple images and combines them to produce one in-focus image. The advanced focusing system enables users to capture an automated, focused image of multiple targets at once, delivering the image clarity needed by professional thermographers and maintenance managers to produce top-quality results and avoid costly rework.

The wireless Ti450 is part of Fluke Connect®, a system of wireless test tools that communicate via the Fluke Connect app, or Fluke Connect Assets software, a cloud-based solution that gathers measurements to provide a comprehensive view of critical equipment status.


Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus.
Uses a built-in laser distance meter that calculates and displays the distance from your designated target.
Hot and cold temperature spot markers
Get 4x the pixel data with SuperResolution.
Wirelessly sync images directly from your camera to the Fluke Connect® system.
Visual and infrared details all in one precisely blended or picture-in-picture image with IR-Fusion® technology.
Monitor processes with video recording, video streaming, and remote control.
See the details you need with interchangeable smart lenses – 2x and 4x telephoto and wide angle.

All thermal imagers need sufficient warm-up time for the most accurate temperature measurements and best image quality. This time can often vary by model and by environmental conditions.

Although most imagers are fully warmed up in 3-5 minutes, it is always best to wait a minimum of 10 minutes if the most accurate temperature measurement is important to your application. When you move the Imager between environments with large differences in ambient temperature, more adjustment time can be required.

Fluke Ti450 Specifications:

  • IFOV with standard lens (spatial resolution): 1.31 mRad, D:S 753:1.
  • Detector resolution: 320 x 240 (76,800 pixels) — or 640 x 480 with SuperResolution.
  • SuperResolution: Yes, on camera and in software.
  • MultiSharp™ Focus: Yes, focused near and far, throughout the field of view.
  • LaserSharp® Auto Focus: Yes, for consistently in-focus images.
  • Laser distance meter: Yes, calculates distance to the target for precisely focused images.
  • Advanced manual focus: Yes
  • Ruggedised touchscreen display: 3.5 inch (landscape) 640 x 480 LCD.
  • Digital zoom: 2x and 4x.
  • Temperature measurement range (not calibrated below -10 °C): -20 °C to +1200 °C (-4 °F to +2192 °F).
  • Fluke Connect® app compatible: Yes.
  • AutoBlend™ mode: Min, Mid, Max IR plus full visible on camera.
  • Picture-In-Picture (PIP): Yes.
  • Built-in digital camera (visible light): 5 MP.
  • Standard lens: IFOV (spatial resolution) - 1.31 mRad, D:S 753:1.
  • Field of view: 24 °H x 17 °V.
  • Minimum focus distance: 15 cm (approx. 6 in).
  • Memory options: Removable 4 GB micro SD memory card, 4 GB internal flash memory.
  • Memory review: Thumbnail and fullscreen review.
  • Voice annotation: 60 seconds maximum recording time per image.
  • IR-PhotoNotes™: Yes (5 images).
  • Text annotation: Yes.
  • Video recording: Standard and radiometric.
  • Batteries: Two lithium ion smart battery packs with five-segment LED display to show charge level.
  • Battery life: 3-4 hours per battery.
  • Battery charge time: 2.5 hours to full charge.
  • Frame rate: 9 Hz.
  • Laser pointer: Yes.
  • LED light (torch): Yes.
  • Colour alarms (temperature alarms): High temperature, low temperature, and isotherms (within range).
  • Spot temperature: Hot and cold spot markers.
  • Operating temperature: -10 °C to +50 °C (14 °F to 122 °F).
  • Dimensions (H x W x L):    27.7 x 12.2 x 16.7 cm (10.9 x 4.8 x 6.5 in).
  • Weight inc. battery: 1.04 kg (2.3 lb).
  • Fluke Ti450 warranty: Two-years (standard), extended warranties are available.

Includes: Fluke Ti450 Thermal imager with standard infrared lens, AC power supply and battery pack charger (including universal AC adapters), Two, rugged lithium ion smart battery packs, USB cable, HDMI video cable, 4 GB micro SD card, Rugged, hard carrying case, Soft transport bag, Adjustable hand strap.

Write a review

Fluke Ti450 9Hz Thermal Imager